CM405-FC-BO Pinout

As viewed from above the 8 Pin SH Connector has the following pinout:

1. BAT (2-8s Voltage In)]

2. CURR (0-3.3v Current reading from ESC

3. GND (General Ground)

4. NC (Not Connected)

5. 1 (PWM 1)

6. 2 (PWM 2)

7. 3 (PWM 3)

8. 4 (PWM 4)

PWM 5 & 6 are also available (non populated 2.54mm Header).

It is recommended to solder a power connection if you intend to use high power accessories.